How To Configure RIP Routing

In This Tutorial We Are going to Learn How To Configure RIP Routing Using 3 Routers

Firt Off All Take 3 Router And 2 pc’s And Draw This Type Of Senerio

Now Assign The Ip And Set The Hostname To The Routers So Click On Router And Do Configuration

Configuration On Router 1
R1
Router>enable
Router#config t
Router(config)#Hostname R1
R1(config)#int f0/0
R1(config-if)#ip add 1.0.0.1 255.0.0.0
R1(config-if)#no shut
R1(config-if)#exit
R1(config)#int f0/1
R1(config-if)#ip add 2.0.0.1 255.0.0.0
R1(config-if)#no shut
R1(config)#exit
Router#

Configuration On Router 2
R2
Router>enable
Router#config t
Router(config)#Hostname R2
R2(config)#int f0/0
R2(config-if)#ip add 2.0.0.2 255.0.0.0
R2(config-if)#no shut
R2(config-if)#exit
R2(config)#int f0/1
R2(config-if)#ip add 3.0.0.1 255.0.0.0
R2(config-if)#no shut
R2(config)#exit
Router#

Configuration On Router 3
R3
Router>enable
Router#config t
Router(config)#Hostname R3
R2(config)#int f0/0
R2(config-if)#ip add 3.0.0.2 255.0.0.0
R2(config-if)#no shut
R2(config-if)#exit
R2(config)#int f0/1
R2(config-if)#ip add 4.0.0.1 255.0.0.0
R2(config-if)#no shut
R2(config)#exit
Router#

Now Ip Has Assigned Now Do RIP Routing to The Router

Routing Configuration On Router 1
R1
R1(config)#
R1(config)#router rip
R1(config-router)#version 1
R1(config-router)#net 1.0.0.0
R1(config-router)#net 2.0.0.0

Routing Configuration On Router 2
R2
R2(config)#
R2(config)#router rip
R2(config-router)#version 1
R2(config-router)#net 2.0.0.0
R2(config-router)#net 3.0.0.0

Routing Configuration On Router 3
R3
R3(config)#
R3(config)#router rip
R3(config-router)#version 1
R3(config-router)#net 3.0.0.0
R3(config-router)#net 4.0.0.0