How To Configure Static Routing Using 4 Routers

In This Tutorial We Are Going To Learn How To Configure Static Routing

First Off All We Have To Take 4 Router 4 Switch 4 Pc’s And Draw This Type Of Senerio

Here We Use Serial Cable To Connect The Routers And Auto Cable Use For The Switch And Pc

Now We Have To Assign The Ip To The Routers And Pcs

Here Is The Configuration Of Router For Assign The Ip

Config On Router 1

Router>enable
Router#config t
Router(config)#hostname R1
R1(config)#int f0/0
R1(config-if)#ip add 1.0.0.1 255.0.0.0
R1(config-if)#no shut
R1(config-if)#exit
R1(config)#int s2/0
R1(config-if)#clock rate 64000
R1(config-if)#ip add 5.0.0.1 255.0.0.0
R1(config-if)#no shut
R1(config-if)#exit
R1(config)#int s3/0
R1(config-if)#ip add 8.0.0.2 255.0.0.0
R1(config-if)#no shut
R1(config-if)#exit

Config On Router 2

Router>enable
Router#config t
Router(config)#hostname R2
R2(config)#int f0/0
R2(config-if)#ip add 2.0.0.1 255.0.0.0
R2(config-if)#no shut
R2(config-if)#exit
R2(config)#
R2(config)#int s3/0
R2(config-if)#ip add 5.0.0.2 255.0.0.0
R2(config-if)#no shut
R2(config-if)#exit
R2(config)#int s2/0
R2(config-if)#clock rate 64000
R2(config-if)#ip add 6.0.0.1 255.0.0.0
R2(config-if)#no shut
R2(config-if)#exit
R2(config)#

Config On Router 3

Router>enable
Router#config t
Router(config)#hostname R3
R3(config)#int f0/0
R3(config-if)#ip add 3.0.0.1 255.0.0.0
R3(config-if)#no shut
R3(config-if)#exit
R3(config)#
R3(config)#int s3/0
R3(config-if)#ip add 6.0.0.2 255.0.0.0
R3(config-if)#no shut
R3(config-if)#exit
R3(config)#int s2/0
R3(config-if)#clock rate 64000
R3(config-if)#ip add 7.0.0.1 255.0.0.0
R3(config-if)#no shut
R3(config-if)#exit
R3(config)#

Config On Router 4

Router>enable
Router#config t
Router(config)#hostname R4
R4(config)#int f0/0
R4(config-if)#ip add 4.0.0.1 255.0.0.0
R4(config-if)#no shut
R4(config-if)#exit
R4(config)#
R4(config)#int s3/0
R4(config-if)#ip add 7.0.0.2 255.0.0.0
R4(config-if)#no shut
R4(config-if)#exit
R4(config)#int s2/0
R4(config-if)#clock rate 64000
R4(config-if)#ip add 8.0.0.1 255.0.0.0
R4(config-if)#no shut
R4(config-if)#exit
R4(config)#

Routing on R1
R1>enable
R1#config t
R1(config)#ip route 2.0.0.0 255.0.0.0 5.0.0.2
R1(config)#ip route 6.0.0.0 255.0.0.0 5.0.0.2
R1(config)#ip route 3.0.0.0 255.0.0.0 6.0.0.2
R1(config)#ip route 7.0.0.0 255.0.0.0 6.0.0.2
R1(config)#ip route 4.0.0.0 255.0.0.0 7.0.0.2

Routing on R2
R2>enable
R2#config t
R2(config)#ip route 1.0.0.0 255.0.0.0 5.0.0.1
R2(config)#ip route 3.0.0.0 255.0.0.0 6.0.0.2
R2(config)#ip route 7.0.0.0 255.0.0.0 6.0.0.2
R2(config)#ip route 4.0.0.0 255.0.0.0 7.0.0.2
R2(config)#ip route 8.0.0.0 255.0.0.0 7.0.0.2

Routing on R3
R3>enable
R3#config t
R3(config)#ip route 4.0.0.0 255.0.0.0 7.0.0.2
R3(config)#ip route 8.0.0.0 255.0.0.0 7.0.0.2
R3(config)#ip route 2.0.0.0 255.0.0.0 6.0.0.1
R3(config)#ip route 5.0.0.0 255.0.0.0 6.0.0.1
R3(config)#ip route 1.0.0.0 255.0.0.0 5.0.0.1

Routing on R4
R3>enable
R3#config t
R4(config)#ip route 3.0.0.0 255.0.0.0 7.0.0.1
R4(config)#ip route 6.0.0.0 255.0.0.0 7.0.0.1
R4(config)#ip route 5.0.0.0 255.0.0.0 6.0.0.1
R4(config)#ip route 2.0.0.0 255.0.0.0 6.0.0.1
R4(config)#ip route 1.0.0.0 255.0.0.0 5.0.0.1

Here Now Routing Is Complete And We Have To Check The Connection Is Working Properly Or Not So Go In Pc Command And Type Ping And Then The Ip Address Of The Pc Where You Want To Send The Packet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s