How To Configure Static Routing Using 2 Routers 5 Switch & 5 Pc’s

In This Tutorial We Are Going To Learn How To Configure Static Routing 

In This Tutorial We Have Taken 2 Routers 5 Switch And 5 Pc’s In The Cisco Packet Tracer

After Taking The Pc’s Routers And Switch Something This Type Of Diagram We Have Now 

Here Is The Diagram Now

 
In This Diagram 5 Networks Are There  In Router 1  4Networks Are Directly Connected To Each Othen And We Have To Tell About The Other Network Which Is Not Directly Connected  And In router 2 There Is 3Network Are Directly Connected To Each Other And We HAve To Tell About The Other 2 Networks Which IS Not Directly Connected
 

Now We Have To Assign The IP To All The Routers

Here Is The Coading Of Assining The Ip To The Routers And In This Diagram I Have Taken The Ip Of Class 1

Here IS The Configuration Of Router 1

Router>en
Router#config t
Router(config)#int f0/0
Router(config-if)#ip add 2.0.0.1 255.0.0.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
Router(config)#int f0/1
Router(config-if)#ip add 1.0.0.1 255.0.0.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
Router(config)#int E0/1/0
Router(config-if)#ip add 3.0.0.1 255.0.0.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
Router(config)#int E0/0/0
Router(config-if)#ip add 4.0.0.1 255.0.0.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#

Now Here Is The Configuration Of Router 2

Router>en
Router#config t
Router(config)#int f0/0

Router(config-if)#ip add 4.0.0.2 255.0.0.0

Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
Router(config)#int f0/1
Router(config-if)#ip add 3.0.0.2 255.0.0.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
Router(config)#int E0/1/0
Router(config-if)#ip add 5.0.0.1 255.0.0.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#

Now Our First portion Of Assining The Ip To The Routers IS Complete Now We Have To Do The Configuration Of Static Routing To Both The Routers 

Here Is The Configuration Of Static Routing On Router 1

Router>en
Router#config t
Router(config)#ip route 5.0.0.0 255.0.0.0 3.0.0.2  

Here Now We Complete All The Configuration And  Static Routing Of All Of This Diagram In Router 1  

Here Is The Configuration Of Static Routing On Router 2

Router>en
Router#config t
Router(config)#ip route 1.0.0.0 255.0.0.0 3.0.0.1
Router(config)#ip route 2.0.0.0 255.0.0.0 3.0.0.1

Here Now We Complete All The Configuration And Static Routing Of All Of This Diagram In Router 2


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s